Velisa amacandelo cross CivilCAD

Nalo eli nqaku banikela ubuso omtsha umamkele indawo esemthethweni KwiCACC, umsebenzi omhle wabahlobo be-ARQCOM ngethuba lokuzalisekisa iminyaka eyi-15 kunye nabasebenzisi abangaphezu kwe-20,000 eLatin America. izigaba ezihamba phambili ze-civicad autocad

Kwicandelo layo elitsha "Tutorials" imisebenzi enomdla ifakiwe kunye nengcaciso-nyathelo ngamanyathelo. Kule meko ndifuna ukubonisa umzekelo wokuvelisa amacandelo omnqamlezo ecaleni kwe-axis esembindini usebenzisa i-CivilCAD.

Olu titshala lwakhiwe kwizigaba ezine:

1. Ukwakhiwa kwemodeli yomhlaba wedijithali. Jonga uqeqesho

Ekuqaleni isingeniso kwifomathi yamanqaku enziwe, kuba kulo mhlaba umhlaba onolwazi usebenza kule fom elandelayo:

Inombolo yepaji, X ulungelelaniso, u-Y ulungelelaniso, ukuphakama, iinkcukacha

1 367118.1718 1655897.899 293.47

2 367109.1458 1655903.146 291.81

3 367100.213 1655908.782 294.19

4 367087.469 1655898.508 295.85 CERCO

5 367077.6998 1655900.653 296.2 CERCO

Emva kokungeniswa kwamaphuzu ukulungiswa kwe-triangulation kwisizukulwana se-digital model ichazwe.

Ekugqibeleni, ukwakhiwa kwamanqabunga enqanaba kuchazwa, kubonisa kwinqanaba ngalinye ugcino apho idatha igcinwa khona.

Iifayile ezisezantsi zifakiwe kwakhona ukuze umsebenzisi angayihlakulela inyathelo ngesinyathelo:

  • I-PuntosSB.txt apho amanqaku afakwe khona
  • Amacandelo ahlukeneyo (.dwg) owona mzobo wokugqibela
  • Idatha ye geometry (.sec) equlethe ifayile yokwakheka kwecandelo

izigaba ezihamba phambili ze-civicad autocad

2. Isizukulwana sesitishi kunye nomxube wendlela. Jonga uqeqesho

Kule nqanaba, i-axis yeprofayili yakhiwe, zeziphi izitulo eziveliswa zonke iimitha ze-10.

I-doactic ye-tutorial igcina ingcamango efanayo, ukuze umsebenzisi angazame yedwa, njengomzekelo:

Ngenxa yoko, senza: I-CivilCAD > I-Altimetry> Iprojekthi yeAxis> Iimpawu zakwaMark

Inkqubo isicela ukuba sikhethe i-axis, siyichukumise kufuphi nalapho umgca uqala khona, senza ukungena ukuqinisekiswa ukuba siyavumelana nesi-nomenclature 0 + 00.

Emva koko inkqubo ibuza ubude beli candelo kwicala lasekunene nakwesobunxele. Siza kusebenzisa kulo mzekelo25.00 kumacala omabini.

Emva koko inkqubo icela ukuba yeyiphi ifom esiya kukhetha izitishi:

  • Ikhefu, uthetha kumgama ofanayo, umzekelo kwiimitha ezili-20 nganye.
  • Umgama, kuthetha kumgama othile ukusuka kwimvelaphi, umzekelo weemitha ze-35.25.
  • Isikhululo, xa sinethemba lokungena kwifom yesitishi, njenge 0 + 35.20
  • Dot, oku kungukuthi sifuna ukuyibonisa nge-pointer kumgca
  • Ukugqiba, ukugqiba inkqubo.

Kule meko, siya kusebenzisa ipharamitha yokuqala, (Interval) ukuze sibhale ileta I, kwaye siyakwenzafaka.

izigaba ezihamba phambili ze-civicad autocad

Ekupheleni kweli nqanaba iziqendu zomhlaba zendalo zakhiwe.

3. Ukwakhiwa koyilo Jonga uqeqesho

Kakade kweli nqanaba, kwiprofayili eyakhiwe kwicandelo elidlulileyo idizayilwayo ibonwe, ibonisa iirve ezimele kwaye ibhala iindawo ezibangelwa umdlalo (i-PCV, i-PIV, i-PTV). Kwakhona i ntlambo.

izigaba ezihamba phambili ze-civicad autocad

4. Uhlobo lokwakheka kwesigaba. Jonga uqeqesho

Njengomlinganiselo wokugqibela, uqeqesho lubonisa ukwakhiwa kwecandelo eliqhelekileyo kwibakala.

Njengoko isebenza ne-CivilCAD, iifolda ezisezantsi, iifolda kunye nemithambeka yakhiwe. Umbongo ufana ...

Buyela kwipaneli yasekuqaleni, sisondele ukulungelelanisa iinqanaba zomnqamlezo.

Amaqhosha aphantsi anokuvumela ukuba uqwalasele ezinye iinketho ezinje:

  • ICuneta. Kuyakwazi ukuchaza ukuba sifuna ukuba umgodla uthathelwe ingqalelo kuphela kwiziphelo apho kunqunywe khona kwaye akukho ndawo ikhonkco (ukuzalisa umthamo). Sinokukhetha kwakhona ukuba singabonwa njengobuncwane kunoma yiyiphi na embi, kunye nobukhulu.
  • Isikali Apha sichaza umlinganiselo wezilinganiso ezizenzekelayo kunye nezingezantsi ukudweba kwicandelo ngalinye.
  • Khetha Nazi ezinye iindlela ezikhoyo phakathi kwegridi engezantsi, ecacileyo kunye nezinye izibalo ezingaphandle kwesi sifundo.

Ngaphambi kokuba senze njalo, sinokujonga ngendlela abaza kujonga ngayo. Oku kwenziwa ngeqhosha Uhlolo. Apha ungabona isitishi ngasinye kunye nomzobo walo, ukuphakama kwinqanaba eliphakathi, ukusika kunye nokugquma. Ngeqhosha ukwamukela sibuyela kwipaneli enkulu.

Kwaye ngamacandelo aphuhliswa kunye neprofayili.

izigaba ezihamba phambili ze-civicad autocad

Thina ukuncoma iinzame ARQCOM, kuba ngokuqinisekileyo le Iimfundiso ziya kuphucula izixhobo zolawulo amava ngumsebenzisi babalekayo kuquka 2013 kwi AutoCAD, Bricscad V12 PRO kwaye kwisithuba iintsuku ZWCAD nezinye zitshiphu ku AutoCAD.

http://civilcad.com.mx/tutoriales/

Iimpendulo ze-2 "Ukuvelisa izigaba eziphambene ne-CivilCAD"

  1. kwaye ukuba ndifuna ukwenza okufanayo kodwa ngamacandelwana ahambayo angenawo ububanzi obufanayo besithsaba, ukuba azinjalo, ayenokuba

  2. Ndicinga ukuba kulungile, siyabonga ngesixhobo esikhulu sokwakha.
    Ndiyakuvuyisana, mbulela

Shiya impendulo

Idilesi yakho ye email aziyi kupapashwa.

Le sayithi isebenzisa i-Akismet ukunciphisa ugaxekile. Funda indlela idatha yakho yokubhaliweyo isetyenziswe ngayo.